Strengthening Production Process Steel Wire Cutter Pills Size 0.8mm 1.0mm 1.5mm 2.0mm 2.5mm
Product Description:
Steel Cut Wire Shot
Also Known As: Rounded Low Carbon Steel Cut Wire Shot, Stainless Iron Shot
Production Process: Refined through processes such as drawing, cutting, and strengthening.
Characteristics:
a) Low carbon steel shot has a bainite structure (isothermal transformation), which provides excellent impact resistance and stable performance.
b) Low carbon steel shot is produced using high-quality, low-carbon, low-residual, low-phosphorus, and low-sulfur scrap steel. It does not undergo heat treatment, ensuring the hardness of the steel cut wire shot.
Features:
Coating compatibility: Steel cut wire shot can be engineered with coatings or surface treatments that enhance its compatibility with specific coatings or surface finishes. These coatings can promote better adhesion, prevent contamination, or improve the bonding properties between the shot-blasted surface and subsequent coatings, resulting in improved coating performance and durability.
Reduced dust generation: Innovative manufacturing techniques and surface treatments can be employed to minimize dust generation during the shot blasting process. This not only improves air quality and safety but also reduces the need for frequent cleaning of the work area, increasing operational efficiency.
Advanced recycling technologies: Manufacturers can implement advanced recycling technologies for steel cut wire shot, such as magnetic separation or automated sorting systems. These technologies allow for more efficient and effective recovery of used shot, reducing waste and ensuring a higher percentage of reusable shot for cost savings and environmental benefits.
Surface activation for enhanced bonding: Steel cut wire shot can undergo surface activation treatments that improve its ability to create a strong bond with subsequent coatings or surface treatments. This surface activation enhances the adhesion properties of the treated surface, resulting in improved coating performance and longevity.
Customized packaging and dispensing solutions: Steel cut wire shot can be packaged and delivered in customized packaging formats that optimize convenience, efficiency, and usability. This can include solutions such as bulk containers, pre-measured packs, or dispensing systems that minimize waste, simplify handling, and ensure accurate shot quantities for each application.
Tailored surface roughness ranges: Manufacturers can offer steel cut wire shot with tailored surface roughness ranges to meet specific requirements. This allows for precise control over the desired surface finish, ensuring optimal results for various applications, such as achieving specific roughness parameters for improved adhesion or aesthetics.
Low dust cling properties: Steel cut wire shot can be designed with low dust cling properties, reducing the tendency for dust or debris to cling to the shot's surface. This improves the shot's cleaning efficiency, reduces the frequency of equipment cleaning, and minimizes the risk of contaminants being reintroduced onto the workpiece during the shot blasting process.
Technical Parameters:
| Attribute |
Value |
| Name |
Steel Wire Cut Pills |
| Chemical Composition |
C 0.45～0.75%
Mn 0.40～1.20%
Si 0.10～0.30%
S<0.04%
P<0.04% |
| Microstructure |
Longitudinal (uniformly Deformed Pearlite)
Horizontal (uniformly Deformed Pearlite) |
| Average Hardness |
1.0mm:51～53 HRC(525～561HV)
1.5mm:41～45 HRC(388～436HV) |
| Application |
Shot Blasting, Shot Blasting, Die Casting Cleaning, Casting Shot Blasting, Etc. |
| Hardness Deviation |
The Maximum Deviation Range Is ±1.0HRC Or ±40HV |
| Production Process |
Drawing, Cutting, Strengthening, Etc. |
| Tensile Strength |
1.0mm:1750～2150 Mpa
1.5mm:1250～1450 Mpa |
| Minimum Density |
7.8g/cm3 |
| Size |
0.8mm
1.0mm
1.5mm
2.0mm
2.5mm |
| Key Words |
Stainless steel pills, Rounded low carbon steel wire shot cutting, Steel Wire Cutter Pills |
Applications:
Steel cut wire shot cleaning: shot blasting cleaning, sandblasting cleaning, die casting cleaning, casting shot blasting cleaning, forging shot blasting cleaning, forging sandblasting cleaning, sand cleaning of castings, steel plate cleaning, steel material cleaning, steel plate cleaning, H-beam cleaning, steel structure cleaning.
Packing :
Inner packaging: 25kg/bag with inner film bag.
Outer packaging: nylon woven bag, kraft paper bag, carton.
Whole ton packaging: pallet or ton bag.
FAQ:
- Q: What is the brand name of this product?
A: The brand name of this product is longkuang.
- Q: What are the available models for this product?
A: The available models for this product are 0.8mm, 1.0mm, 1.5mm, 2.0mm, and 2.5mm.
- Q: Where is this product manufactured?
A: This product is manufactured in China.
- Q: What certifications does this product have?
A: This product is certified by SAE J441 and JB/T 8354-1996.
- Q: What is the minimum order quantity for this product?
A: The minimum order quantity for this product is 1000kg.
- Q: Is the price for this product negotiable?
A: Yes, the price for this product is negotiable.
- Q: What are the packaging options for this product?
A: The packaging options for this product include ton bag, wooden box, wooden pallet, and barrel.
- Q: How long is the delivery time for this product?
A: The delivery time for this product is determined based on tonnage and specification model.
- Q: What are the payment terms for this product?
A: The payment terms for this product are L/C and T/T.
- Q: What is the supply ability for this product?
A: The supply ability for this product is 50000ton/year.
Your message must be between 20-3,000 characters!
