Product Description:
As the name suggests, grinding pellets are forged products, also known as high manganese steel pellets. They are cut into cylinders using high-manganese steel wire at high speed, and then rounded with lead angles. They have no voids, no cracks, and no breakage. Its consumable shape From large to small until the particles are as small as 3/10 of the original particles, they are removed by the dust extraction system or separation equipment of the shot blasting machine to complete its entire service life cycle. Grinding shot is a new type of steel wire shot, which is to cut the steel wire into a cylinder with the same length and diameter and then grind it to remove its edges and corners to make it into a spherical ball body. Such a product has the advantages of both cast steel shot and steel wire cut shot: it can be polished evenly, does not damage the workpiece, is not easy to break, has high wear resistance and has a long service life after repeated polishing. Grinding steel shot is currently the mainstream metal abrasive material for finishing automobile and motorcycle accessories.
Features:
○a Low carbon steel shot has a bainite structure (isothermal transformation). The bainite structure has strong impact resistance and stable performance;
○b Low-carbon steel shot is made of high-quality, low-carbon, low-residue, low-phosphorus and sulfur new scrap steel without heat treatment to ensure the hardness of the steel shot;
○c Due to its organizational structure, low carbon steel shot has high toughness and is not easily broken. The number of repeated cycles reaches about 3,600 times, and the consumption is reduced by more than 20% compared with the same high-quality high carbon steel shot;
○d Since low carbon steel shots always remain round, the contact between the equipment and the steel plate is always smooth. High carbon steel shots are easily broken and produce angular steel shots, which increase the wear of the shot blasting head and lining and reduce the efficiency of the shot blasting machine. Service life! It also causes a passive situation of long maintenance time and downtime! The maintenance cost caused by the wear and tear of low carbon steel shot on equipment is at least 15% lower than the maintenance cost caused by high carbon steel shot;
○e. The low carbon steel shot will only become smaller layer by layer, so the dust generated will be greatly reduced, and the dust emission will be reduced by at least 20%.
Technical Parameters:
| Technical Parameters |
Description |
| Application |
Springs, Connecting Rods, Crankshafts, Gears, Rocker Arms, Camshafts And Other Components Subject To Alternating Torque In The Automotive Industry, As Well As Other Industrial Fields |
| Features |
Strong Impact Resistance And Stable Performance |
| Hardness Deviation |
-3.0-3.0HRC |
| Production Process |
Refined By Drawing, Cutting, Strengthening And Other Processes |
| Hardness |
HRC 36-52 |
| Size |
0.2mm-3.0mm |
| Chemical Composition |
C 0.06-0.12%, Si 0.12-0.3%, Mn 0.25-0.5%, S 0.045%, P 0.05% |
| Name |
Grinding Pills |
| Key Words |
Stainless steel pills, Rounded low carbon steel wire shot cutting, Stainless steel pills for polishing |
Applications:
Metal processing: Grinding pellets are often used in the metal processing industry to remove oxide layers, scratches, welding slag and other unevenness on the metal surface to make the metal surface smoother and more uniform. They can be used for grinding and polishing castings, forgings, steel, aluminum, stainless steel and other metal products.
Automobile industry: Grinding pellets are widely used in automobile manufacturing and repair. They are often used for surface treatment of automotive parts, such as grinding and polishing engine parts, body parts, wheels, etc., to improve their surface quality and smoothness.
Aerospace: Grinding pellets play an important role in the aerospace industry. They are used for grinding and polishing aerospace engine parts, aircraft structural parts, etc. to ensure that their surface quality meets high demanding standards.
Electronics industry: Grinding pellets are used in the electronics industry for surface treatment of electronic components and semiconductor devices. They remove welding slag, oxide layers and other contaminants, improving component surface finish and electrical performance.
Precision machining: Grinding pellets are widely used in the field of precision machining, such as grinding and polishing of optical components, watches, jewelry, etc., to obtain high-precision and high-finish surfaces.
Packing:
nner packaging: 25kg/bag with inner film bag.
Outer packaging: nylon woven bag, kraft paper bag, carton.
Whole ton packaging: pallet or ton bag.
FAQ:
- Q: What is the brand name of this product?
A: The brand name of this product is longkuang.
- Q: What is the model number of this product?
A: The model number of this product is 0.2mm-3.0mm.
- Q: Where is this product manufactured?
A: This product is manufactured in China.
- Q: What certifications does this product have?
A: This product is certified by GB/T19001-2016/ISO9001:2015.
- Q: What is the minimum order quantity for this product?
A: The minimum order quantity for this product is 1000kg.
- Q: Is the price of this product negotiable?
A: Yes, the price of this product is negotiable.
- Q: How is this product packaged?
A: This product is packaged in ton bags, wooden boxes, wooden pallets, or barrels.
- Q: How long does it take to deliver this product?
A: The delivery time depends on the tonnage and specification model of the product.
- Q: What are the payment terms for this product?
A: The payment terms for this product are T/T and L/C.
- Q: What is the supply ability of this product?
A: The supply ability of this product is 50000 tons per year.
Your message must be between 20-3,000 characters!
